Cold Storage Panel Installation: Three Key Tips
Proper installation of cold storage panels is crucial for temperature control and energy efficiency. Shandong Runte Refrigeration Technology provides three key guidelines for installation.
The correct installation of cold storage panels is essential for maintaining stable internal temperatures and minimizing energy consumption. Shandong Runte Refrigeration Technology Co., Ltd. emphasizes that meticulous installation practices are fundamental to the integrity and performance of cold storage facilities.
The company notes that poorly installed panels can lead to difficulties in temperature regulation, potentially causing spoilage of stored goods and overburdening refrigeration compressors, thereby increasing operational costs. Selecting the right panels and ensuring their proper assembly is highlighted as the most effective method for the longevity and efficiency of a cold storage unit.
When installing wall panels, the process should commence at the corners. Panels are secured to angle irons using bolts inserted through pre-drilled holes and sealed with gasket material. It is critical to verify the vertical and horizontal alignment of the panels before permanent fixing. Protective shields are necessary during welding operations to prevent damage to the panels from high temperatures and slag.
Subsequent wall panels are installed by interlocking them with the adjacent ones, with sealant applied within the grooves to ensure an airtight seal. Panels are then fastened using connecting locks, maintaining a consistent gap of approximately 3mm, which is then sealed. Similar procedures apply to the installation of roof and corner panels to guarantee the overall structural integrity and thermal insulation of the cold storage unit.